公司新闻
Makrolon PC GF9002
发布时间： 2024-03-26 10:41 更新时间： 2025-01-17 07:02
产品说明：
ISO 7391-PC,MR,(,,)-09-9,GF15
Formerly Makrolon DP1-1882
MVR (300 °C/1.2 kg) 9.5 cm3/10 min
15 % Glass fiber reinforced
Medium viscosity
Easy release
Injection molding - Melt temperature 310 - 330 °C
Available in opaque colors only
Preprocessing
| Max. Water content |
物性信息：
| 密度 | 1.29 g/cc | 0.0466 lb/in³ | ISO 1183 |
| 1.10 g/cc @Temperature 300 °C | 0.0397 lb/in³ @Temperature 572 °F | Melt | |
| 熔体流动速率 | 10 g/10 min @Load 1.20 kg, Temperature 300 °C | 10 g/10 min @Load 2.65 lb, Temperature 572 °F | ISO 1133 |
| 抗张强度(断裂) | 45.0 MPa | 6530 psi | ISO 527-1/-2 |
| 伸长率 (断裂) | 8.5 % | 8.5 % | ISO 527-1/-2 |
| 拉伸模量 | 4.50 GPa | 653 ksi | ISO 527-1/-2 |
| 比热容 | 1.55 J/g-°C | 0.370 BTU/lb-°F | Melt |
| 导热系数 | 0.198 W/m-K | 1.37 BTU-in/hr-ft²-°F | Melt |
| 维卡软化温度 | 144 °C | 291 °F | 50°C/h 50N; ISO 306 |
| 加工（熔体）温度 | 300 °C | 572 °F | Injection Molding; ISO 294 |
| 310 - 330 °C | 590 - 626 °F | ||
| 模具温度 | 80.0 - 130 °C | 176 - 266 °F | |
| 110 °C | 230 °F | Injection Molding; ISO 10724 | |
| Ejection Temperature | 140 °C | 284 °F | |
| 射速 | 200 mm/sec | 7.87 in/sec | ISO 294 |
其他新闻
- Makrolon PC GF8002 2025-01-17
- Makrolon PC FU1007 2025-01-17
- Makrolon PC GF8001 2025-01-17
- Makrolon PC FR7087 2025-01-17
- Makrolon PC FR6002 2025-01-17
- Makrolon PC FP3087 2025-01-17
- Makrolon PC ET3227 2025-01-17
- Makrolon PC ET3137 2025-01-17
- Makrolon PC ET3117 Covestro 2025-01-17
- Makrolon PC ET3113 2025-01-17
- Makrolon PC ET2613 2025-01-17
- Makrolon PC ET PC UV540 2025-01-17
- Makrolon PC ET PC UV530 2025-01-17
- Makrolon PC ET PC UV510 2025-01-17
- Makrolon PC ET PC UV130 2025-01-17
